MM-IoT-SDK Porting Guide (App Note 45)
This guide is for embedded firmware engineers porting the mm-iot-sdk to a microcontroller that Morse Micro does not officially support. You can complete a port without prior knowledge of HaLow, Wi-Fi, or Morse Micro transceivers.
MM8108-EKH05 USER GUIDE
The MM8108 EKH05 User Guide provides detailed instructions for deploying and programming Morse Micro’s Wi-Fi HaLow EKH05 evaluation board. It walks through setup, configuration, firmware operations, development options, and troubleshooting for IoT developers.
OTP and BCF Selection (App Note 41)
The “OTP and BCF Selection (App Note 41)” explains how to select and configure One-Time Programmable (OTP) memory and Board Configuration Files (BCFs) for Wi-Fi HaLow modules. It guides designers through proper BCF versioning, OTP settings, and design time options.
Morse Micro Rate Control (App Note 28)
The “Morse Micro Rate Control (App Note 28)” describes how the Wi-Fi HaLow rate control algorithm works—how modulation, coding, and link adaptation are managed automatically. It offers insights into how throughput is optimized under varying channel conditions.
How to Configure Virtual Wire (App Note 37)
The “How to Configure Virtual-Wire (App Note 37)” walks you through setting up virtual-wire links over Wi-Fi HaLow—enabling transparent point-to-point wireless serial links. It covers configuration steps, CLI commands, and practical use cases.
How to do a Sniffer Capture (App Note 36)
The “How to Do a Sniffer Capture (App Note 36)” explains how to capture Wi-Fi HaLow traffic using a sniffer setup. It includes configuration steps, commands, and tips for effective packet capture and debugging.
How to configure a Starlink or LTE Dongle Internet Uplink Connection (App Note 35)
The “How to Configure a Starlink LTE Dongle Internet Uplink (App Note 35)” shows how to set up a Starlink-connected LTE dongle as the uplink for a Wi-Fi HaLow system. It covers interface configuration, network detection, and fallback connectivity techniques.
2.4GHz Range Extension Using HaLow (App Note 33)
The “2.4 GHz Range Extension Using Wi-Fi HaLow (App Note 33)” describes how to extend conventional 2.4 GHz network coverage using bolted-on HaLow links. It includes test setup, integration tips, and performance metrics.
How to configure 802.11s Mesh (App Note 32)
The “How to Configure 802.11s Mesh (App Note 32)” explains how to set up Wi-Fi HaLow nodes in mesh mode using the 802.11s standard. It includes configuration steps, CLI commands, and topology guidance.
How To Configure EasyMesh (App Note 31)
The “How To Configure EasyMesh (App Note 31)” describes how to enable and configure EasyMesh functionality for Wi-Fi HaLow systems. It walks through setup steps, command usage, and topology options to build interoperable mesh networks.
