Bypass Boobytrap (App Note 29)
The “Bypass Boobytrap (App Note 29)” investigates performance variability in high-frequency RF circuits caused by parasitic impedances in decoupling capacitors. It models and measures how capacitor inductance interacts to create unwanted resonances and shows design adjustments to stabilize gain.
Centralized Authentication Control (App Note 25)
The “Centralized Authentication & Control (App Note 25)” explains how to integrate a central authentication mechanism to manage user access and network control across Wi-Fi systems. It focuses on implementing backend authorization, coordinated control, and session management between access points.
MM6108 TCP Keep Alive Offload (App Note 21)
The MM6108 TCP Keep-Alive Offload (App Note 21) describes how to offload TCP keep-alive functionality within the MM6108 module to reduce host processor overhead and power consumption during idle periods.
HaLowLink User Guide v2.11.2
The HaLowLink 1 and 2 User Guide v2.7.5 explains how to install, configure, and use Morse Micro’s Wi-Fi HaLowLink devices as a router, extender, or access point. It covers setup options, interface modes, firmware updates, and troubleshooting for integrators.
MM6108-EKH05 USER GUIDE
The MM6108 EKH05 User Guide provides detailed instructions for deploying and programming Morse Micro’s Wi-Fi HaLow EKH05 evaluation board. It walks through setup, configuration, firmware operations, development options, and troubleshooting for IoT developers.
MM6108 Eval Kit User Guide 2.7
The MM6108 Evaluation Kit User Guide v2.7 provides comprehensive instructions for deploying Morse Micro’s Wi-Fi HaLow evaluation hardware on OpenWRT. It covers board setup, operating modes (AP, STA, mesh, virtual-wire), CLI/UI commands, configuration options, performance testing, and troubleshooting—designed to help engineers accelerate integration and evaluation of the MM6108 HaLow chipset.
BCF Overview and Impact on System Performance (App Note 26)
The “BCF Overview & Impact on System Performance (App Note 26)” gives a deep dive into how Board Configuration Files (BCFs) affect Wi-Fi HaLow module performance. It explains BCF parameters, calibration impacts, RF behaviour, and trade-offs designers must navigate.
Thin LMAC (App Note 20)
The “Thin LMAC (App Note 20)” explains how to enable and configure Thin LMAC mode on Morse Micro Wi-Fi HaLow access points to support over 2,000 stations. It details setup, configuration, scaling, and verification methods for large-scale HaLow deployments.
